| Hauthane HD-2139 | Hauthaway | Hauthane HD-2139 is an aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. It was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating du...view more Hauthane HD-2139 is an aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. It was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating during PVC expansion. HD-2139 is ideally suited for PVC roll or sheet goods requiring a 180 degree reverse bend. HD-2139 can be used as a sole vehicle or blended with acrylic emulsions and applied by rotogravure, reverse roll, flexible blade, or wire wound rod. It may be thickened for alternative application methods. view less | |
| Texicryl® 13-824 | Scott Bader | Texicryl® 13-824 is a hard non film forming emulsion which can be coalesced to form a plasticiser and solvent resistant film. Excellent adhesion to vinyl and non-absorbent susbstrates. Suitable for inks PVC flooring and wallpaper. | |
| Domopur 0215 35 Wa | HELIOS RESINS | Domopur 0215 35 Wa is a self-crosslinking aliphatic polyurethane dispersion suitable for 1K and 2K finishes for parquet, concrete, cork, and PVC flooring. Formulations with the resin provide nonyellowing, high abrasion, chemical, black heel marks, and scr...view more Domopur 0215 35 Wa is a self-crosslinking aliphatic polyurethane dispersion suitable for 1K and 2K finishes for parquet, concrete, cork, and PVC flooring. Formulations with the resin provide nonyellowing, high abrasion, chemical, black heel marks, and scratch resistance. view less | |
| UVECOAT® 3003 | Allnex | UVECOAT® 3003 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. This resin has been developed for indoor applications on PVC flooring. Coatings based on UVECOAT® 3003 combines excellent scratch and chemical resistance with...view more UVECOAT® 3003 is an amorphous unsaturated polyester resin for use in UV curable powder coatings. This resin has been developed for indoor applications on PVC flooring. Coatings based on UVECOAT® 3003 combines excellent scratch and chemical resistance with good flexibility. view less | Request Sample |
| GENOMER* 4215 | Rahn AG | GENOMER* 4215 is an aliphatic Polyester Urethane Acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC,PE etc.); PV...view more GENOMER* 4215 is an aliphatic Polyester Urethane Acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC,PE etc.); PVC flooring; adhesives; and plastic varnishes. view less | Request Sample |
| GENOMER* 1122 | Rahn AG | GENOMER* 1122 is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; ...view more GENOMER* 1122 is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; laminating adhesives; and adhesives. view less | Request Sample |
| GENOMER* 1122TF | Rahn AG | GENOMER* 1122TF is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings...view more GENOMER* 1122TF is a monofunctional urethane acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: printing inks and varnishes for plastic foils; PVC flooring and foil coatings; laminating adhesives; and adhesives. view less | Request Sample |
| MIRAMER M282 | Rahn AG | MIRAMER M282 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, plastic coatings and PVC flooring. It exhibits low volatility, high flexibility, good ad...view more MIRAMER M282 is a polyether diacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in adhesives, plastic coatings and PVC flooring. It exhibits low volatility, high flexibility, good adhesion and good solvent resistance. view less | Request Sample |
| L-2911 | Chan Sieh Enterprises Co, Ltd. | L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, an...view more L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, and parquet. view less | |
| Fillite Standard Grades | Tolsa SA | Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboar...view more Fillite Standard Grades consists of glass hard, inert, hollow silicate spheres. It is designed to reduce the weight of plastics, rubbers, resins, and cement. It can be used in PVC flooring, brake linings, phenolics and epoxies, cast polyesters, wallboard joint compounds, oil well cement, and tile adhesives. view less | |
| L-3021 | Chan Sieh Enterprises Co, Ltd. | L-3021 is an aliphatic polycarbonate polyol with a solid content ratio of 39.5%. This product is very hard and tough, and provides water, stain, abrasion and chemical resistance. It can be used as the top coats for PVC and non-PVC flooring, and plastic ...view more L-3021 is an aliphatic polycarbonate polyol with a solid content ratio of 39.5%. This product is very hard and tough, and provides water, stain, abrasion and chemical resistance. It can be used as the top coats for PVC and non-PVC flooring, and plastic and wood coating, if combined with an acrylic emulsion. view less | |
| GENOMER* 4215/M22 | Rahn AG | GENOMER* 4215/M22 is an aliphatic polyester urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC, PE etc.); PVC flooring...view more GENOMER* 4215/M22 is an aliphatic polyester urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC, PE etc.); PVC flooring; industrial coatings and adhesives; and plastic varnishes. view less | Request Sample |
| SHIKOH™ UV-6630B | Nippon Gohsei | SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, pla...view more SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, plastics, and electronics, as well as masking tapes and adhesive films and labels. view less | |
| MIRAMER M130 | Rahn AG | MIRAMER M130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: pressure sensitive adhesives; PVC flooring; paper varnishes; and screen ...view more MIRAMER M130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: pressure sensitive adhesives; PVC flooring; paper varnishes; and screen inks. It is an excellent adhesion promoter due to its very low surface tension. view less | Request Sample |
| L-3050 | Chan Sieh Enterprises Co, Ltd. | L-3050 is an aliphatic polycarbonate polyol with a solid content ratio of 34.7%. This product is very hard, tough and flexible. It has good chemical, solvent, water, humidity, and UV resistance. L-3050 adheres well to plastics. This product can be used as the top-coat for PVC and non-PVC flooring...view more L-3050 is an aliphatic polycarbonate polyol with a solid content ratio of 34.7%. This product is very hard, tough and flexible. It has good chemical, solvent, water, humidity, and UV resistance. L-3050 adheres well to plastics. This product can be used as the top-coat for PVC and non-PVC flooring, and to coat metal, wood and parquet. view less | |
| UCECOAT® 7733 | Allnex | UCECOAT® 7733 is a Xi-free (non irritant) UV-curable polyurethane dispersion characterized by its outstanding stain resistances both in clear and white pigmented coatings, while maintaining very good flexibility. It is recommended for use in: waterbased UV clear and white pigmented coatings on wood, and waterbased UV protective clear coatings for PVC flooring...view more UCECOAT® 7733 is a Xi-free (non irritant) UV-curable polyurethane dispersion characterized by its outstanding stain resistances both in clear and white pigmented coatings, while maintaining very good flexibility. It is recommended for use in: waterbased UV clear and white pigmented coatings on wood, and waterbased UV protective clear coatings for PVC flooring. view less | Request Sample |
| MIRAMER M170 | Rahn AG | MIRAMER M170 is a 2-(2-ethoxyethoxy) ethylacrylate (EOEOEA). It is a reactive diluent for radically curable coatings and adhesives. The product has a high cutting power in combination with good reactivity. This product is recommended for use in the following applications: pressure sensitive adhesives; printed circuit boards; metal, plastic and paper coatings; and PVC flooring...view more MIRAMER M170 is a 2-(2-ethoxyethoxy) ethylacrylate (EOEOEA). It is a reactive diluent for radically curable coatings and adhesives. The product has a high cutting power in combination with good reactivity. This product is recommended for use in the following applications: pressure sensitive adhesives; printed circuit boards; metal, plastic and paper coatings; and PVC flooring. view less | Request Sample |
| L-3042 | Chan Sieh Enterprises Co, Ltd. | L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coati...view more L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coatings for metal and plastic surfaces, lacquers and coatings for wood and parquet floors, overprint varnishes, furniture coatings, and textured coatings. view less | |
| Hauthane HD-2113 | Hauthaway | Hauthane HD-2113 is a very hard, aliphatic, polyester-based, aqueous polyurethane dispersion specifically developed for factory coated PVC flooring. It is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without t...view more Hauthane HD-2113 is a very hard, aliphatic, polyester-based, aqueous polyurethane dispersion specifically developed for factory coated PVC flooring. It is ideally suited for PVC roll or sheet goods requiring maximum stain and abrasion resistance without the requirement for 180 degree reverse bend. HD-2113 may be used as supplied or blended with acrylic emulsions for application by spray, rotogravure, reverse roll, flexible blade, or wire wound rod. view less | |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...view more Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. view less | |
| SYNTHOLUX BW 1896 | Synthopol Chemie Germany | SYNTHOLUX BW 1896 is an aqueous, aliphatic polyurethane dispersion, physically drying and UV-curable. It contains neither emulsifiers nor co-solvents. This product is recommended for applications where hardness, scratch resistances, adhesion and stain resistances are necessary. It is also suitable for coatings for plastics, especially resilient flooring coatings based on PVC and linoleum. SYNTHOLUX BW 1896 can also used for plastic substrates as polycarbonate and PVC...view more SYNTHOLUX BW 1896 is an aqueous, aliphatic polyurethane dispersion, physically drying and UV-curable. It contains neither emulsifiers nor co-solvents. This product is recommended for applications where hardness, scratch resistances, adhesion and stain resistances are necessary. It is also suitable for coatings for plastics, especially resilient flooring coatings based on PVC and linoleum. SYNTHOLUX BW 1896 can also used for plastic substrates as polycarbonate and PVC in automotive, audio/video, packaging and many other applications. view less | |
| VINNAPAS® EP 177 | Wacker Chemie AG 瓦克化学 | VINNAPAS® EP 177 is an aqueous plasticizer-free, 60% dispersion of a copolymer of vinyl acetate and ethylene. It can be used in the following applications lamination of both plasticized and non plasticized, PVC, polyamide, polyurethane foam, polystyrene f...view more VINNAPAS® EP 177 is an aqueous plasticizer-free, 60% dispersion of a copolymer of vinyl acetate and ethylene. It can be used in the following applications lamination of both plasticized and non plasticized, PVC, polyamide, polyurethane foam, polystyrene foam and polyester to paper or to textile fabrics, adhesion promoter for PVC coatings, flocking adhesive for foam moldings, back coating of woven materials, needle-felt, floor-coverings and tufted carpets. It can be applied in textile and elastic flooring and wall-covers. view less | |
| Butyl Benzyl Phthalate (BBP) | ChemCeed | Butyl Benzyl Phthalate (BBP) is a is high solvating, fast fusing plasticizer with high efficiency which can be used with a variety of resins. BBP is used for many PVC calendaring and extrusion operations and is an industry standard for vinyl flooring. BBP...view more Butyl Benzyl Phthalate (BBP) is a is high solvating, fast fusing plasticizer with high efficiency which can be used with a variety of resins. BBP is used for many PVC calendaring and extrusion operations and is an industry standard for vinyl flooring. BBP also finds use in many coatings, inks, adhesives, and caulks. view less | |
| Hanwha KM-31 | Hanwha Chemical Corporation | Hanwha KM-31 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, casting leathers, and erasers. | |
| Hanwha HB-65 | Hanwha Chemical Corporation | Hanwha HB-65 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-fi...view more Hanwha HB-65 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-finishing effect is required. view less | |
| Hanwha HB-100 | Hanwha Chemical Corporation | Hanwha HB-100 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-f...view more Hanwha HB-100 is a PSR resin paste made of Polyvinyl Chloride that adds a satisfactory deglossing / deglazing effect to most products. It is well suited for use in the production of flooring materials, wallpapers, tarpaulins and sealants wherever a matt-finishing effect is required. view less | |
| Hanwha KH-31G | Hanwha Chemical Corporation | Hanwha KH-31G is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tarpaulins, and other products requiring low-temperatu...view more Hanwha KH-31G is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tarpaulins, and other products requiring low-temperature foaming. view less | |
| L-3410 | Chan Sieh Enterprises Co, Ltd. | L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wo...view more L-3410 is an ultraviolet-curable polyol with a solid-content ratio of 39,8%. This product is hard and flexible, and provides abrasion, chemical and stain resistance. It can be used in PVC and non-PVC floor coatings, to coat furniture, paper, plastic, wood, parquet, overprint varnishes, and inks. view less | |
| Hanwha KH-60 | Hanwha Chemical Corporation | Hanwha KH-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with high transparency and low density. It is well suitable for use in the production of flooring materials, wall paper, tarpulin, and other products requiring low...view more Hanwha KH-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with high transparency and low density. It is well suitable for use in the production of flooring materials, wall paper, tarpulin, and other products requiring low-temperature foaming products. view less | |
| Hanwha KL-31 | Hanwha Chemical Corporation | Hanwha KL-31 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, leathers, and other products requiring low-temperature ...view more Hanwha KL-31 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, leathers, and other products requiring low-temperature melting foams. view less | |
| Hanwha KL-701 | Hanwha Chemical Corporation | Hanwha KL-701 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tile carpets, and other products requiring low-temper...view more Hanwha KL-701 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with a fast gelling speed. It is well suitable for use in the production of flooring materials, wall paper, tile carpets, and other products requiring low-temperature foaming products. view less | |
| Hanwha KH-10 | Hanwha Chemical Corporation | Hanwha KH-10 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and absorption rate. It is well suitable for use in the production of flooring materials, wall paper, erasers, and other products requiring additi...view more Hanwha KH-10 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and absorption rate. It is well suitable for use in the production of flooring materials, wall paper, erasers, and other products requiring additional transparency and thermal stability. view less | |
| Hanwha KH-31S | Hanwha Chemical Corporation | Hanwha KH-31S is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and excellent thermal stability. It is well suitable for use in the production of flooring materials, wall paper, casting leathers, and other pro...view more Hanwha KH-31S is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and excellent thermal stability. It is well suitable for use in the production of flooring materials, wall paper, casting leathers, and other products requiring low-temperature foaming products. view less | |
| IONPURE | DKSH | IONPURE is a soluble glass containing anti-microbial metal ions. It maintains the transparency when added to PP, PVC, PC, ABS, PC. It exhibits a high heat resistance and high performance at low concentration. IONPURE is not discolored by compounding and w...view more IONPURE is a soluble glass containing anti-microbial metal ions. It maintains the transparency when added to PP, PVC, PC, ABS, PC. It exhibits a high heat resistance and high performance at low concentration. IONPURE is not discolored by compounding and with age, as it can control the speed of releasing metal ions. It is suitable for use in flooring materials and wallpapers. view less | Request Sample |
| Hanwha EM-2070 | Hanwha Chemical Corporation | Hanwha EM-2070 is a low density PSR resin paste made of a Polyvinyl Chloride emulsion with a low degree of sedimentation. It is well suited for the use in producing tarpulins, flooring products and for high speed coatings or fillers. | |
| Uniplex 354 | Rhein Chemie Rheinau GmbH | Uniplex 354 is 2,2,4 -trimethylpentane-1,3-diol dibenzoate appearing as a clear liquid. This dibenzoate is used as a moderate, non-phthalate plasticizer with high solvating characteristics, low migration properties, and bleed resistance. Uniplex 354 is suitable for use in coatings, adhesives and plastisols and finds application in PVC plastisol printing on coloured fabrics, plastisols for artificial leather, flooring...view more Uniplex 354 is 2,2,4 -trimethylpentane-1,3-diol dibenzoate appearing as a clear liquid. This dibenzoate is used as a moderate, non-phthalate plasticizer with high solvating characteristics, low migration properties, and bleed resistance. Uniplex 354 is suitable for use in coatings, adhesives and plastisols and finds application in PVC plastisol printing on coloured fabrics, plastisols for artificial leather, flooring, wallpaper, and inks, and as a plasticizer for adhesives, caulks, and sealants. view less | |
| Polyester Actylate SP 300 | Soltech Ltd | Polyester Actylate SP 300 is a self initiation prepolymer without photo-initiator that is designed to prevent yellowing, extraction, and residual odors after curing. Common applications of this product include PVC floor coatings, ABS coatings, and food pa...view more Polyester Actylate SP 300 is a self initiation prepolymer without photo-initiator that is designed to prevent yellowing, extraction, and residual odors after curing. Common applications of this product include PVC floor coatings, ABS coatings, and food packaging. Polyester Actylate SP 300 is 100% polymer solid by weight with a viscosity of 500-4,000 at 60℃. view less | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC...view more DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC...view more DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC...view more DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC...view more DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC...view more DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. view less | |
| PChem® BM76 | Pioneer Chemicals Co., Ltd. | PChem® BM76, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of marine coating, concrete sealer, wood coating, plastic coating, seamless flooring...view more PChem® BM76, in the form or a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers good fast tack-free time, durability, hard heat resistance, good dry and good adhesion to different substrates such as polystyrene, acrylic, PVC, and ABS. It is very compatible with numerous nitrocellulose and solvents and generally used in applications of marine coating, concrete sealer, wood coating, plastic coating, seamless flooring, protective coatings, gravure inks, and silk screen printing inks. PChem® BM76 has a molecular weight of 105,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 8.0 mgKOH/g, and an inherent viscosity of 0.37. view less | |
| DOUBLEMER® PET5EOTA-A | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | DOUBLEMER® PET5EOTA-A is a high boiling monomeric liquid and has relative low viscosity. It is a reactive tetrafunctional monomer and a highly reactive crosslinking agent which is polymerized readily by common free radical initiators. This product is a clear liquid with low odor. It is suitable for coatings for metal, optical, PVC...view more DOUBLEMER® PET5EOTA-A is a high boiling monomeric liquid and has relative low viscosity. It is a reactive tetrafunctional monomer and a highly reactive crosslinking agent which is polymerized readily by common free radical initiators. This product is a clear liquid with low odor. It is suitable for coatings for metal, optical, PVC floor, wood and paper and electronics for solder masks. view less | |
| Syncryl GPTA | Galstaff Multiresine S.p.A. | Syncryl GPTA is an acrylic monomer diluent with low viscosity. It is ideal for use in radiation curing formulations such as sun glass, metal, PVC floor coatings, wood, paper, textile, electronics photopolymers, paints and inks. Syncryl GPTA provides fast ...view more Syncryl GPTA is an acrylic monomer diluent with low viscosity. It is ideal for use in radiation curing formulations such as sun glass, metal, PVC floor coatings, wood, paper, textile, electronics photopolymers, paints and inks. Syncryl GPTA provides fast surface curing, low shrinkage, flexibility, adhesion, weatherability, water, chemical and abrasion resistance. view less | |
| Bisomer® BDDMA | GEO Specialty Chemicals, Inc., Paints & Coatings Group | Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol. Bisomer® BDDMA is an excellent reactive diluent in UV curable wood coatings due to its low viscosity. It is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring...view more Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol. Bisomer® BDDMA is an excellent reactive diluent in UV curable wood coatings due to its low viscosity. It is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring and synthetic marble. Bisomer® BDDMA is used in photopolymers, wire and cable coatings, adhesives and sealants. It also offers excellent compatibility with unsaturated polyesters for gel-coats, chemical fixings and anchor bolts. view less | |
| AFCONA - 2754 | AFCONA Additives Sdn Bhd | AFCONA – 2754 is a silicone-free polymer in a SBP spirit solvent. This clear liquid functions as an anti-foam and de-aeration agent for solvent containing and solvent-free systems and finds application in epoxy and polyurethane floor coatings, high polar systems used in wood coatings such as NC, polyurethane, and acid curing, and in coil coatings on basic PVC...view more AFCONA – 2754 is a silicone-free polymer in a SBP spirit solvent. This clear liquid functions as an anti-foam and de-aeration agent for solvent containing and solvent-free systems and finds application in epoxy and polyurethane floor coatings, high polar systems used in wood coatings such as NC, polyurethane, and acid curing, and in coil coatings on basic PVC plastisols. view less | |
| MB-2 | Pioneer Chemicals Co., Ltd. | MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in several organic solvents including esters, chlorinated solvents ketones, aromatic hydrocarbons, and it has good compatibility with other film forming resins such as plasticizers, vinyl resin and NC. MB-2 is broadly used in PVC printing inks, masonry coatings, PVC processing, upholstery, floor coatings, gravure inks, PVC...view more MB-2, in the form of a bead, is a copolymer of Methacrylates and Styrene with enough hardness, offers high gloss, good gasoline resistance, abrasion resistance, humidity and heat resistance, and good solvent release ability. It is easily soluble in several organic solvents including esters, chlorinated solvents ketones, aromatic hydrocarbons, and it has good compatibility with other film forming resins such as plasticizers, vinyl resin and NC. MB-2 is broadly used in PVC printing inks, masonry coatings, PVC processing, upholstery, floor coatings, gravure inks, PVC top coatings, and road marking. It has a molecular weight of 140,000 g/mol, moisture content of equal to or less than 1.0%, acid value of equal to or less than 1.0 mgKOH/g, and an inherent viscosity of 0.62 to 0.68. view less | |
| Hanwha KCM-12 | Hanwha Chemical Corporation | Hanwha KCM-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature me...view more Hanwha KCM-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature melting points. view less | |
| Hanwha KCH-12 | Hanwha Chemical Corporation | Hanwha KCH-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature me...view more Hanwha KCH-12 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with a fast gelling speed. It is well suitable for use in the production of carpets, adhesives and other products requiring low-temperature melting points. view less | |
| DOUBLEMER® DI-TMPTA | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | DOUBLEMER® Di-TMPTA is a high boiling monomeric liquid and has relative low viscosity. It is a tetrafunctional monomer which under exposure to ionizing radiation or added sources of free radicals undergoes polymerization. This product is recommended for use in: adhesives; coatings for metal, optical, paper, PVC...view more DOUBLEMER® Di-TMPTA is a high boiling monomeric liquid and has relative low viscosity. It is a tetrafunctional monomer which under exposure to ionizing radiation or added sources of free radicals undergoes polymerization. This product is recommended for use in: adhesives; coatings for metal, optical, paper, PVC floor and wood; electronics for solder masks; inks for flexo, gravure, offset and screen. view less | |
| Syncryl DPGDA | Galstaff Multiresine S.p.A. | Syncryl DPGDA is a low viscosity difunctional acrylic monomer, ideal for use in radiation curing formulations. This product allows applications on glass, metal, PVC floor coatings, wood, paper, textile, litho, silk screen, offset, binder adhesive, electro...view more Syncryl DPGDA is a low viscosity difunctional acrylic monomer, ideal for use in radiation curing formulations. This product allows applications on glass, metal, PVC floor coatings, wood, paper, textile, litho, silk screen, offset, binder adhesive, electronics, photopolymers, inks and paints. Syncryl DPGDA provides low volatility, flexibility, adhesion, hardness and weatherability, water abrasion chemical and weather resistance. view less | |
| DOUBLEMER® PET5EO4A | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | DOUBLEMER® PET5EO4A is a high boiling monomeric liquid and has relative low viscosity. It is a reactive tetrafunctional monomer and a highly reactive crosslinking agent which is polymerized readily by common free radical initiators. The chemical name is Ethoxylated Pentaerythritol Tetraacrylate. This product is recommended for use in: coatings for metal, optical, PVC...view more DOUBLEMER® PET5EO4A is a high boiling monomeric liquid and has relative low viscosity. It is a reactive tetrafunctional monomer and a highly reactive crosslinking agent which is polymerized readily by common free radical initiators. The chemical name is Ethoxylated Pentaerythritol Tetraacrylate. This product is recommended for use in: coatings for metal, optical, PVC floor, wood and paper; electronics for solder masks; and inks for flexo, gravure, offset and screen applications. view less | |
| Hanwha KCH-15 | Hanwha Chemical Corporation | Hanwha KCH-15 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with low density and a small change when stood up. It is well suitable for use in the production of carpets, chipping paints and other product...view more Hanwha KCH-15 is a micro-suspension PSR paste resin made from a Vinyl Chloride-Vinyl Acetate Copolymer substrate with low density and a small change when stood up. It is well suitable for use in the production of carpets, chipping paints and other products requiring satisfactory adhesion to metal surfaces and corrosion resistance. view less | |
| DOUBLEMER® 2019 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | DOUBLEMER® 2019 is a functional acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of DOUBLEMER® 2019 also exhibit excellent adhesion and low viscosity, which are difficult to obtain at the same time. This clear liquid is recommended for the following applications: coatings for optical, paper, PVC...view more DOUBLEMER® 2019 is a functional acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of DOUBLEMER® 2019 also exhibit excellent adhesion and low viscosity, which are difficult to obtain at the same time. This clear liquid is recommended for the following applications: coatings for optical, paper, PVC floor and wood; electronics for solder masks; inks for flexo, gravure, offset and screen; hardcoats for display; and CD and DVD. view less | |
| DOUBLEMER® 2015 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | DOUBLEMER® 2015 is a 15 functional acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of DOUBLEMER® 2015 also exhibit excellent adhesion and low viscosity which are difficult to obtain at the same time. This clear liquid is recommended for the following applications: coatings for optical, paper, PVC...view more DOUBLEMER® 2015 is a 15 functional acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of DOUBLEMER® 2015 also exhibit excellent adhesion and low viscosity which are difficult to obtain at the same time. This clear liquid is recommended for the following applications: coatings for optical, paper, PVC floor and wood; electronics for solder masks; inks for flexo, gravure, offset and screen; hardcoats for display; and CD and DVD. view less | |
| AFCONA - 2720 | AFCONA Additives Sdn Bhd | AFCONA – 2720 is a silicone-free polymer in an alkylbenzene and SBP spirit solvent. This slightly yellow liquid functions as an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, two-pack epoxies, polyester/melamine stoving systems, PVC...view more AFCONA – 2720 is a silicone-free polymer in an alkylbenzene and SBP spirit solvent. This slightly yellow liquid functions as an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, two-pack epoxies, polyester/melamine stoving systems, PVC compounds, and printing inks. view less | |
| PolyQ® 9300 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | PolyQ® 9300 is a self UV curing pre-polymer without photoinitiator. The UV/EB cured products based on PolyQ® 9300 are characterized by the following performance properties: no residual odor after curing; no extractions; non yellowing & excellent weatherability; and liquid type for easy handling. Formulated UV/EB curable products containing PolyQ® 9300 may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods. PolyQ® 9300 is recommended for use in the following applications: plastic coating (PVC...view more PolyQ® 9300 is a self UV curing pre-polymer without photoinitiator. The UV/EB cured products based on PolyQ® 9300 are characterized by the following performance properties: no residual odor after curing; no extractions; non yellowing & excellent weatherability; and liquid type for easy handling. Formulated UV/EB curable products containing PolyQ® 9300 may be applied by lithographic, screen, gravure, direct or reverse roll, and curtain coating methods. PolyQ® 9300 is recommended for use in the following applications: plastic coating (PVC floor, ABS, PC, etc.); wood fillers and top coats; clear coatings in paper and plastics; and food package. This product appears as a clear yellowish liquid. view less | |
| Bayhydrol® UH 2606 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2606 is a solvent-free anionic polyurethane dispersion containing polycarbonate that is used as a binder for the formulation of water-reducible coatings for plastic substrates and wood materials. This product has an Efflux time at 23°C (4mmcup) of 12-60, a non-volatile content (1g / 1h / 125°C) of 34-36, and a pH value of 7-9. The product was designed specifically for the coating of plastic substrates. In addition the use in the formulation of PVC...view more Bayhydrol® UH 2606 is a solvent-free anionic polyurethane dispersion containing polycarbonate that is used as a binder for the formulation of water-reducible coatings for plastic substrates and wood materials. This product has an Efflux time at 23°C (4mmcup) of 12-60, a non-volatile content (1g / 1h / 125°C) of 34-36, and a pH value of 7-9. The product was designed specifically for the coating of plastic substrates. In addition the use in the formulation of PVC floor coatings, the binder exhibits a high grade property profile on a variety of substrates. Filler and topcoat applications (one and two-component) are also plausible. Other possibilities are wood and furniture applications. Bayhydrol UH 2606 yields coatings with good leveling, chemical and weather stabilities. They are also characterized by a tough but flexible property profile. Very good combinations are possible with polyester, polyurethane and acrylic dispersions, and combinations with waterborne UV systems are possible. Resistances can also be improved by post-curing with e.g. Bayhydur®. The mixing ratio of mill base to hardener is generally 10:1. view less |
